Anope 1.8.9.3131 - NickServ
    Catalan . German . English . Spanish . French . Greek . Hungarian . Italian . Dutch . Polish . Portuguese . Russian . Turkish .
    | NickServ | ChanServ | OperServ | MemoServ | HostServ | BotServ |

  • HELP
    	NickServ allows you to "register" a nickname and
    	prevent others from using it. The following
    	commands allow for registration and maintenance of
    	nicknames; to use them, type /msg NickServ command.
    	For more information on a specific command, type
    	/msg NickServ HELP command.
    
    
    
  • REGISTER
    	Syntax: /msg NickServ REGISTER password [email]
     
    	Syntax: REGISTER password [email]
    
    	Registers your nickname in the NickServ database.  Once
    	your nick is registered, you can use the SET and ACCESS
    	commands to configure your nick's settings as you like
    	them.  Make sure you remember the password you use when
    	registering - you'll need it to make changes to your nick
    	later.  (Note that case matters!  ANOPE, Anope, and
    	anope are all different passwords!)
    
    	Guidelines on choosing passwords:
    
    	Passwords should not be easily guessable.  For example,
    	using your real name as a password is a bad idea.  Using
    	your nickname as a password is a much worse idea ;) and,
    	in fact, NickServ will not allow it.  Also, short
    	passwords are vulnerable to trial-and-error searches, so
    	you should choose a password at least 5 characters long.
    	Finally, the space character cannot be used in passwords.
    
    	The parameter email is optional and will set the email
    	for your nick immediately. However, it may be required
    	on certain networks.
    	Your privacy is respected; this e-mail won't be given to
    	any third-party person.
    
    	This command also creates a new group for your nickname,
    	that will allow you to register other nicks later sharing
    	the same configuration, the same set of memos and the
    	same channel privileges. For more information on this
    	feature, type /msg NickServ HELP GROUP.
    
    
  • GROUP
    	Syntax: /msg NickServ GROUP target password
     
    	Syntax: GROUP target password
    
    	This command makes your nickname join the target nickname's
    	group. password is the password of the target nickname.
    
    	Joining a group will allow you to share your configuration,
    	memos, and channel privileges with all the nicknames in the
    	group, and much more!
    
    	A group exists as long as it is useful. This means that even
    	if a nick of the group is dropped, you won't lose the
    	shared things described above, as long as there is at
    	least one nick remaining in the group.
    
    	You can use this command even if you have not registered
    	your nick yet. If your nick is already registered, you'll
    	need to identify yourself before using this command. Type
    	/msg NickServ HELP IDENTIFY for more information. This
    	last may be not possible on your IRC network.
    
    	It is recommended to use this command with a non-registered
    	nick because it will be registered automatically when
    	using this command. You may use it with a registered nick (to
    	change your group) only if your network administrators allowed
    	it.
    
    	You can only be in one group at a time. Group merging is
    	not possible.
    
    	Note: all the nicknames of a group have the same password.
    
    
  • IDENTIFY
    	Syntax: /msg NickServ IDENTIFY password
     
    	Syntax: IDENTIFY password
    
    	Tells NickServ that you are really the owner of this
    	nick.  Many commands require you to authenticate yourself
    	with this command before you use them.  The password
    	should be the same one you sent with the REGISTER
    	command.
    
    
  • LOGOUT
    	Syntax: /msg NickServ LOGOUT
     
    	Syntax: LOGOUT
    
    	This reverses the effect of the IDENTIFY command, i.e.
    	make you not recognized as the real owner of the nick
    	anymore. Note, however, that you won't be asked to reidentify
    	yourself.
    
    
  • DROP
    	Syntax: /msg NickServ DROP [nickname]
     
    	Syntax: DROP [nickname]
    
    	Drops your nickname from the NickServ database.  A nick
    	that has been dropped is free for anyone to re-register.
    
    	You may drop a nick within your group by passing it
    	as the nick parameter.
    
    	In order to use this command, you must first identify
    	with your password (/msg NickServ HELP IDENTIFY for more
    	information).
    
    
  • ACCESS
    	Syntax: /msg NickServ ACCESS ADD mask
     
    	Syntax: ACCESS ADD mask
    	        ACCESS DEL mask
    	        ACCESS LIST
    
    	Modifies or displays the access list for your nick.  This
    	is the list of addresses which will be automatically
    	recognized by NickServ as allowed to use the nick.  If
    	you want to use the nick from a different address, you
    	need to send an IDENTIFY command to make NickServ
    	recognize you.
    
    	Examples:
    
    	    ACCESS ADD anyone@*.bepeg.com
    	        Allows access to user anyone from any machine in
    	        the bepeg.com domain.
    
    	    ACCESS DEL anyone@*.bepeg.com
    	        Reverses the previous command.
    
    	    ACCESS LIST
    	        Displays the current access list.
    
    
  • SET
    	Syntax: /msg NickServ SET option parameters
     
    	Syntax: SET option parameters
    
    	Sets various nickname options.  option can be one of:
    
    	    DISPLAY    Set the display of your group in Services
    	    PASSWORD   Set your nickname password
    	    LANGUAGE   Set the language Services will use when
    	                   sending messages to you
    	    URL        Associate a URL with your nickname
    	    EMAIL      Associate an E-mail address with your nickname
    	    ICQ        Associate an ICQ number with your nickname
    	    GREET      Associate a greet message with your nickname
    	    KILL       Turn protection on or off
    	    SECURE     Turn nickname security on or off
    	    PRIVATE    Prevent your nickname from appearing in a
    	                   /msg NickServ LIST
    	    HIDE       Hide certain pieces of nickname information
    	    MSG        Change the communication method of Services
    	    AUTOOP     Should services op you automatically.
    
    	In order to use this command, you must first identify
    	with your password (/msg NickServ HELP IDENTIFY for more
    	information).
    
    	Type /msg NickServ HELP SET option for more information
    	on a specific option.
    
    
  • SET DISPLAY
    	Syntax: /msg NickServ SET DISPLAY new-display
     
    	Syntax: SET DISPLAY new-display
    
    	Changes the display used to refer to your nickname group in
    	Services. The new display MUST be a nick of your group.
    
    
  • SET PASSWORD
    	Syntax: /msg NickServ SET PASSWORD new-password
     
    	Syntax: SET PASSWORD new-password
    
    	Changes the password used to identify you as the nick's
    	owner.
    
    
  • SET LANGUAGE
    	Syntax: /msg NickServ SET LANGUAGE number
     
    	Syntax: SET LANGUAGE number
    
    	Changes the language Services uses when sending messages to
    	you (for example, when responding to a command you send).
    	number should be chosen from the following list of
    	supported languages:
    
    
    
  • SET URL
    	Syntax: /msg NickServ SET URL url
     
    	Syntax: SET URL url
    
    	Associates the given URL with your nickname.  This URL
    	will be displayed whenever someone requests information
    	on your nick with the INFO command.
    
    
  • SET EMAIL
    	Syntax: /msg NickServ SET EMAIL address
     
    	Syntax: SET EMAIL address
    
    	Associates the given E-mail address with your nickname.
    	This address will be displayed whenever someone requests
    	information on the nickname with the INFO command.
    
    
  • SET HIDE
    	Syntax: /msg NickServ SET HIDE {EMAIL | STATUS | USERMASK | QUIT} {ON | OFF}
     
    	Syntax: SET HIDE {EMAIL | STATUS | USERMASK | QUIT} {ON | OFF}
    
    	Allows you to prevent certain pieces of information from
    	being displayed when someone does a NickServ INFO on your
    	nick.  You can hide your E-mail address (EMAIL), last seen
    	user@host mask (USERMASK), your services access status
    	(STATUS) and  last quit message (QUIT).
    	The second parameter specifies whether the information should
    	be displayed (OFF) or hidden (ON).
    
    
  • SET ICQ
    	Syntax: /msg NickServ SET ICQ number
     
    	Syntax: SET ICQ number
    
    	Associates the given ICQ number with your nickname.  This
    	number will be displayed whenever someone requests
    	information on your nick with the INFO command.
    
    
  • SET GREET
    	Syntax: /msg NickServ SET GREET message
     
    	Syntax: SET GREET message
    
    	Makes the given message the greet of your nickname, that
    	will be displayed when joining a channel that has GREET
    	option enabled, provided that you have the necessary
    	access on it.
    
    
  • SET KILL
    	Syntax: /msg NickServ SET KILL {ON | QUICK | IMMED | OFF}
     
    	Syntax: SET KILL {ON | QUICK | IMMED | OFF}
    
    	Turns the automatic protection option for your nick
    	on or off.  With protection on, if another user
    	tries to take your nick, they will be given one minute to
    	change to another nick, after which NickServ will forcibly change
    	their nick.
    
    	If you select QUICK, the user will be given only 20 seconds
    	to change nicks instead of the usual 60.  If you select
    	IMMED, user's nick will be changed immediately without being
    	warned first or given a chance to change their nick; please
    	do not use this option unless necessary.  Also, your
    	network's administrators may have disabled this option.
    
    
  • SET SECURE
    	Syntax: /msg NickServ SET SECURE {ON | OFF}
     
    	Syntax: SET SECURE {ON | OFF}
    
    	Turns NickServ's security features on or off for your
    	nick.  With SECURE set, you must enter your password
    	before you will be recognized as the owner of the nick,
    	regardless of whether your address is on the access
    	list.  However, if you are on the access list, NickServ
    	will not auto-kill you regardless of the setting of the
    	KILL option.
    
    
  • SET PRIVATE
    	Syntax: /msg NickServ SET PRIVATE {ON | OFF}
     
    	Syntax: SET PRIVATE {ON | OFF}
    
    	Turns NickServ's privacy option on or off for your nick.
    	With PRIVATE set, your nickname will not appear in
    	nickname lists generated with NickServ's LIST command.
    	(However, anyone who knows your nickname can still get
    	information on it using the INFO command.)
    
    
  • UPDATE
    	Syntax: /msg NickServ UPDATE
     
    	Syntax: UPDATE
    
    	Updates your current status, i.e. it checks for new memos,
    	sets needed chanmodes (ModeonID) and updates your vhost and
    	your userflags (lastseentime, etc).
    
    
  • SET HIDE
    	Syntax: /msg NickServ SET HIDE {EMAIL | STATUS | USERMASK | QUIT} {ON | OFF}
     
    	Syntax: SET HIDE {EMAIL | STATUS | USERMASK | QUIT} {ON | OFF}
    
    	Allows you to prevent certain pieces of information from
    	being displayed when someone does a NickServ INFO on your
    	nick.  You can hide your E-mail address (EMAIL), last seen
    	user@host mask (USERMASK), your services access status
    	(STATUS) and  last quit message (QUIT).
    	The second parameter specifies whether the information should
    	be displayed (OFF) or hidden (ON).
    
    
  • SET MSG
    	Syntax: /msg NickServ SET MSG {ON | OFF}
     
    	Syntax: SET MSG {ON | OFF}
    
    	Allows you to choose the way Services are communicating with
    	you. With MSG set, Services will use messages, else they'll
    	use notices.
    
    
  • RECOVER
    	Syntax: /msg NickServ RECOVER nickname [password]
     
    	Syntax: RECOVER nickname [password]
    
    	Allows you to recover your nickname if someone else has
    	taken it; this does the same thing that NickServ does
    	automatically if someone tries to use a kill-protected
    	nick.
    
    	When you give this command, NickServ will bring a fake
    	user online with the same nickname as the user you're
    	trying to recover your nick from.  This causes the IRC
    	servers to disconnect the other user.  This fake user will
    	remain online for NickServ to ensure that the other
    	user does not immediately reconnect; after that time, you
    	can reclaim your nick.  Alternatively, use the RELEASE
    	command (/msg NickServ HELP RELEASE) to get the nick
    	back sooner.
    
    	In order to use the RECOVER command for a nick, your
    	current address as shown in /WHOIS must be on that nick's
    	access list, you must be identified and in the group of
    	that nick, or you must supply the correct password for
    	the nickname.
    
    
  • RELEASE
    	Syntax: /msg NickServ RELEASE nickname [password]
     
    	Syntax: RELEASE nickname [password]
    
    	Instructs NickServ to remove any hold on your nickname
    	caused by automatic kill protection or use of the RECOVER
    	command.  This holds lasts for NickServ;
    	this command gets rid of them sooner.
    
    	In order to use the RELEASE command for a nick, your
    	current address as shown in /WHOIS must be on that nick's
    	access list, you must be identified and in the group of
    	that nick, or you must supply the correct password for
    	the nickname.
    
    
  • GHOST
    	Syntax: /msg NickServ GHOST nickname [password]
     
    	Syntax: GHOST nickname [password]
    
    	Terminates a "ghost" IRC session using your nick.  A
    	"ghost" session is one which is not actually connected,
    	but which the IRC server believes is still online for one
    	reason or another.  Typically, this happens if your
    	computer crashes or your Internet or modem connection
    	goes down while you're on IRC.
    
    	In order to use the GHOST command for a nick, your
    	current address as shown in /WHOIS must be on that nick's
    	access list, you must be identified and in the group of
    	that nick, or you must supply the correct password for
    	the nickname.
    
    
  • INFO
    	Syntax: /msg NickServ INFO nickname [ALL]
     
    	Syntax: INFO nickname [ALL]
    
    	Displays information about the given nickname, such as
    	the nick's owner, last seen address and time, and nick
    	options. If you are identified for the nick you're
    	getting information for and ALL is specified, you will
    	be shown all the information; regardless of whether
    	it's hidden or not.
    
    
  • LIST
    	Syntax: /msg NickServ LIST pattern
     
    	Syntax: LIST pattern
    
    	Lists all registered nicknames which match the given
    	pattern, in nick!user@host format.  Nicks with the
    	PRIVATE option set will not be displayed.
    	Note that a pattern preceding with a '#' specifies a range.
    
    	Examples:
    
    	    LIST *!joeuser@foo.com
    	        Lists all nicks owned by joeuser@foo.com.
    
    	    LIST *Bot*!*@*
    	        Lists all registered nicks with Bot in their
    	        names (case insensitive).
    
    	    LIST *!*@*.bar.org
    	        Lists all nicks owned by users in the bar.org
    	        domain.
    
    	    LIST #50-100
    	        Lists nicks numbers 50-100
    
    
  • ALIST
    	Syntax: /msg NickServ ALIST [level]
     
    	Syntax: ALIST [level]
    
    	Lists all channels you have access on. Optionally, you can specify
    	a level in XOP or ACCESS format. The resulting list will only
    	include channels where you have the given level of access.
    
    	Examples:
    	    ALIST Founder
    	        Lists all channels where you have Founder
    	        access.
    
    	    ALIST AOP
    	        Lists all channels where you have AOP
    	        access or greater.
    
    	    ALIST 10
    	        Lists all channels where you have level 10
    	        access or greater.
    
    	Channels that have the NOEXPIRE option set will be
    	prefixed by an exclamation mark.
    
    
  • GLIST
    	Syntax: /msg NickServ GLIST
     
    	Syntax: GLIST
    
    	Lists all nicks in your group.
    
    
  • STATUS
    	Syntax: /msg NickServ STATUS nickname...
     
    	Syntax: STATUS nickname...
    
    	Returns whether the user using the given nickname is
    	recognized as the owner of the nickname.  The response has
    	this format:
    
    	    nickname status-code
    
    	where nickname is the nickname sent with the command, and
    	status-code is one of the following:
    
    	    0 - no such user online or nickname not registered
    	    1 - user not recognized as nickname's owner
    	    2 - user recognized as owner via access list only
    	    3 - user recognized as owner via password identification
    
    	Up to sixteen nicknames may be sent with each command; the
    	rest will be ignored. If no nickname is given, your status
    	will be returned.
    
    
  • SENDPASS
    	Syntax: /msg NickServ SENDPASS nickname
     
    	Syntax: SENDPASS nickname
    
    	Send the password of the given nickname to the e-mail address
    	set in the nickname record. This command is really useful
    	to deal with lost passwords.
    
    	May be limited to IRC operators on certain networks.
    
    	This command is unavailable when encryption is enabled.
    
    
  • EXPIRES
    
    	Nicknames that are not used anymore are subject to
    	the automatic expiration, i.e. they will be deleted
    	after %d days if not used.
    
    
  • SERVADMIN HELP
    
    	Services admins can also drop any nickname without needing
    	to identify for the nick, and may view the access list for
    	any nickname (/msg NickServ ACCESS LIST nick).
    
    
  • SERVADMIN LOGOUT
    	Syntax: /msg NickServ LOGOUT [nickname [REVALIDATE]]
     
    	Syntax: LOGOUT [nickname [REVALIDATE]]
    
    	Without a parameter, reverses the effect of the IDENTIFY
    	command, i.e. make you not recognized as the real owner of the nick
    	anymore. Note, however, that you won't be asked to reidentify
    	yourself.
    
    	With a parameter, does the same for the given nick. If you
    	specify REVALIDATE as well, Services will ask the given nick
    	to re-identify. This use limited to Services admins.
    
    
  • SERVADMIN DROP
    	Syntax: /msg NickServ DROP [nickname]
     
    	Syntax: DROP [nickname]
    
    	Without a parameter, drops your nickname from the
    	NickServ database.
    
    	With a parameter, drops the named nick from the database.
    	You may drop any nick within your group without any
    	special privileges. Dropping any nick is limited to
    	Services admins.
    
    
  • SERVADMIN LIST
    	Syntax: /msg NickServ LIST pattern [FORBIDDEN] [SUSPENDED] [NOEXPIRE] [UNCONFIRMED]
     
    	Syntax: LIST pattern [FORBIDDEN] [SUSPENDED] [NOEXPIRE] [UNCONFIRMED]
    
    	Lists all registered nicknames which match the given
    	pattern, in nick!user@host format.  Nicks with the PRIVATE
    	option set will only be displayed to Services admins.  Nicks
    	with the NOEXPIRE option set will have a ! appended to
    	the nickname for Services admins.
    
    	If the FORBIDDEN, SUSPENDED, NOEXPIRE or UNCONFIRMED options are given, only
    	nicks which, respectively, are FORBIDDEN, SUSPENDED, UNCONFIRMED or have the
    	NOEXPIRE flag set will be displayed. If multiple options are
    	given, all nicks matching at least one option will be displayed.
    	These options are limited to Services admins.
    
    	Examples:
    
    	    LIST *!joeuser@foo.com
    	        Lists all registered nicks owned by joeuser@foo.com.
    
    	    LIST *Bot*!*@*
    	        Lists all registered nicks with Bot in their
    	        names (case insensitive).
    
    	    LIST * NOEXPIRE
    	        Lists all registered nicks which have been set to
    	        not expire.
    
    
  • SERVADMIN ALIST
    	Syntax: /msg NickServ ALIST [nickname] [level]
     
    	Syntax: ALIST [nickname] [level]
    
    	With no parameters, lists channels you have access on. With
    	one parameter, lists channels that nickname has access
    	on. With two parameters lists channels that nickname has
    	level access or greater on.
    
    	This use limited to Services admins.
    
    
  • SERVADMIN GLIST
    	Syntax: /msg NickServ GLIST [nickname]
     
    	Syntax: GLIST [nickname]
    
    	Without a parameter, lists all nicknames that are in
    	your group.
    
    	With a parameter, lists all nicknames that are in the
    	group of the given nick.
    	This use limited to Services admins.
    
    
  • SERVADMIN GETPASS
    	Syntax: /msg NickServ GETPASS nickname
     
    	Syntax: GETPASS nickname
    
    	Returns the password for the given nickname.  Note that
    	whenever this command is used, a message including the
    	person who issued the command and the nickname it was used
    	on will be logged and sent out as a WALLOPS/GLOBOPS.
    
    	This command is unavailable when encryption is enabled.
    
    
  • SERVADMIN FORBID
    	Syntax: /msg NickServ FORBID nickname [reason]
     
    	Syntax: FORBID nickname [reason]
    
    	Disallows a nickname from being registered or used by
    	anyone.  May be cancelled by dropping the nick.
    
    	On certain networks, reason is required.
    
    
  • SERVADMIN INFO
    
    	Services admins may use the ALL parameter with any nick.
    
    
  • SASET
    	Syntax: /msg NickServ SASET nickname option parameters.
     
    	Syntax: SASET nickname option parameters.
    
    	Sets various nickname options.  option can be one of:
    
    	    DISPLAY    Set the display of the group in Services
    	    PASSWORD   Set the nickname password
    	    URL        Associate a URL with the nickname
    	    EMAIL      Associate an E-mail address with the nickname
    	    ICQ        Associate an ICQ number with the nickname
    	    GREET      Associate a greet message with the nickname
    	    KILL       Turn protection on or off
    	    SECURE     Turn nickname security on or off
    	    PRIVATE    Prevent the nickname from appearing in a
    	                   /msg NickServ LIST
    	    HIDE       Hide certain pieces of nickname information
    	    MSG        Change the communication method of Services
    	    NOEXPIRE   Prevent the nickname from expiring
    	    AUTOOP     Turn autoop on or off
    	    LANGUAGE   Set the language Services will use when
    	               sending messages to nickname
    
    	Type /msg NickServ HELP SASET option for more information
    	on a specific option. The options will be set on the given
    	nickname.
    
    
  • SASET DISPLAY
    	Syntax: /msg NickServ SASET nickname DISPLAY new-display
     
    	Syntax: SASET nickname DISPLAY new-display
    
    	Changes the display used to refer to the nickname group in
    	Services. The new display MUST be a nick of the group.
    
    
  • SASET PASSWORD
    	Syntax: /msg NickServ SASET nickname PASSWORD new-password
     
    	Syntax: SASET nickname PASSWORD new-password
    
    	Changes the password used to identify as the nick's	owner.
    
    
  • SASET URL
    	Syntax: /msg NickServ SASET nickname URL url
     
    	Syntax: SASET nickname URL url
    
    	Associates the given URL with the nickname.  This URL
    	will be displayed whenever someone requests information
    	on the nick with the INFO command.
    
    
  • SASET EMAIL
    	Syntax: /msg NickServ SASET nickname EMAIL address
     
    	Syntax: SASET nickname EMAIL address
    
    	Associates the given E-mail address with the nickname.
    
    
  • SASET ICQ
    	Syntax: /msg NickServ SASET nickname ICQ number
     
    	Syntax: SASET nickname ICQ number
    
    	Associates the given ICQ number with the nickname.  This
    	number will be displayed whenever someone requests
    	information on the nick with the INFO command.
    
    
  • SASET GREET
    	Syntax: /msg NickServ SASET nickname GREET message
     
    	Syntax: SASET nickname GREET message
    
    	Makes the given message the greet of the nickname, that
    	will be displayed when joining a channel that has GREET
    	option enabled, provided that the user has the necessary
    	access on it.
    
    
  • SASET KILL
    	Syntax: /msg NickServ SASET nickname KILL {ON | QUICK | IMMED | OFF}
     
    	Syntax: SASET nickname KILL {ON | QUICK | IMMED | OFF}
    
    	Turns the automatic protection option for the nick
    	on or off.  With protection on, if another user
    	tries to take the nick, they will be given one minute to
    	change to another nick, after which NickServ will forcibly change
    	their nick.
    
    	If you select QUICK, the user will be given only 20 seconds
    	to change nicks instead of the usual 60.  If you select
    	IMMED, user's nick will be changed immediately without being
    	warned first or given a chance to change their nick; please
    	do not use this option unless necessary.  Also, your
    	network's administrators may have disabled this option.
    
    
  • SASET SECURE
    	Syntax: /msg NickServ SASET nickname SECURE {ON | OFF}
     
    	Syntax: SASET nickname SECURE {ON | OFF}
    
    	Turns NickServ's security features on or off for your
    	nick.  With SECURE set, you must enter your password
    	before you will be recognized as the owner of the nick,
    	regardless of whether your address is on the access
    	list.  However, if you are on the access list, NickServ
    	will not auto-kill you regardless of the setting of the
    	KILL option.
    
    
  • SASET PRIVATE
    	Syntax: /msg NickServ SASET nickname PRIVATE {ON | OFF}
     
    	Syntax: SASET nickname PRIVATE {ON | OFF}
    
    	Turns NickServ's privacy option on or off for the nick.
    	With PRIVATE set, the nickname will not appear in
    	nickname lists generated with NickServ's LIST command.
    	(However, anyone who knows the nickname can still get
    	information on it using the INFO command.)
    
    
  • SASET HIDE
    	Syntax: /msg NickServ SASET nickname HIDE {EMAIL | STATUS | USERMASK | QUIT} {ON | OFF}
     
    	Syntax: SASET nickname HIDE {EMAIL | STATUS | USERMASK | QUIT} {ON | OFF}
    
    	Allows you to prevent certain pieces of information from
    	being displayed when someone does a NickServ INFO on the
    	nick.  You can hide the E-mail address (EMAIL), last seen
    	user@host mask (USERMASK), the services access status
    	(STATUS) and  last quit message (QUIT).
    	The second parameter specifies whether the information should
    	be displayed (OFF) or hidden (ON).
    
    
  • SASET MSG
    	Syntax: /msg NickServ SASET nickname MSG {ON | OFF}
     
    	Syntax: SASET nickname MSG {ON | OFF}
    
    	Allows you to choose the way Services are communicating with
    	the given user. With MSG set, Services will use messages,
    	else they'll use notices.
    
    
  • SASET NOEXPIRE
    	Syntax: /msg NickServ SASET nickname NOEXPIRE {ON | OFF}
     
    	Syntax: SASET nickname NOEXPIRE {ON | OFF}
    
    	Sets whether the given nickname will expire.  Setting this
    	to ON prevents the nickname from expiring.
    
    
  • SASET AUTOOP
    	Syntax: /msg NickServ SASET nickname AUTOOP {ON | OFF}
     
    	Syntax: SASET nickname AUTOOP {ON | OFF}
    
    	Sets whether the given nickname will be opped automatically.
    	Set to ON to allow ChanServ to op the given nickname
    	automatically when joining channels.
    
    
  • SASET LANGUAGE
    	Syntax: /msg NickServ SASET nickname LANGUAGE number
     
    	Syntax: SASET nickname LANGUAGE number
    
    	Changes the language Services uses when sending messages to
    	nickname (for example, when responding to a command he sends).
    	number should be chosen from a list of supported languages
    	that you can get by typing /msg NickServ HELP SET LANGUAGE.