Anope 1.8.9.3131 - ChanServ
    Catalan . German . English . Spanish . French . Greek . Hungarian . Italian . Dutch . Polish . Portuguese . Russian . Turkish .
    | NickServ | ChanServ | OperServ | MemoServ | HostServ | BotServ |

  • HELP
    	ChanServ allows you to register and control various
    	aspects of channels.  ChanServ can often prevent
    	malicious users from "taking over" channels by limiting
    	who is allowed channel operator privileges.  Available
    	commands are listed below; to use them, type
    	/msg ChanServ command.  For more information on a
    	specific command, type /msg ChanServ HELP command.
    
    
    
  • EXPIRES
    
    	Note that any channel which is not used for %d days
    	(i.e. which no user on the channel's access list enters
    	for that period of time) will be automatically dropped.
    
    
  • REGISTER
    	Syntax: /msg ChanServ REGISTER channel password description
     
    	Syntax: REGISTER channel password description
    
    	Registers a channel in the ChanServ database.  In order
    	to use this command, you must first be a channel operator
    	on the channel you're trying to register.  The password
    	is used with the IDENTIFY command to allow others to
    	make changes to the channel settings at a later time.
    	The last parameter, which must be included, is a
    	general description of the channel's purpose.
    
    	When you register a channel, you are recorded as the
    	"founder" of the channel.  The channel founder is allowed
    	to change all of the channel settings for the channel;
    	ChanServ will also automatically give the founder
    	channel-operator privileges when s/he enters the channel.
    	See the ACCESS command (/msg ChanServ HELP ACCESS) for
    	information on giving a subset of these privileges to
    	other channel users.
    
    	NOTICE: In order to register a channel, you must have
    	first registered your nickname.  If you haven't,
    	/msg ChanServ HELP for information on how to do so.
    
    
  • IDENTIFY
    	Syntax: /msg ChanServ IDENTIFY channel password
     
    	Syntax: IDENTIFY channel password
    
    	Authenticates you to ChanServ as the founder of the given
    	channel.  Many commands require you to use this command
    	before using them.  The password should be the same one
    	you sent with the REGISTER command.
    
    
  • LOGOUT
    	Syntax: /msg ChanServ LOGOUT channel nickname
     
    	Syntax: LOGOUT channel nickname
    
    	This command will log the selected nickname out meaning they
    	would have to reidentify themselves to regain their access.
    
    	If you are the founder of the channel, you can log out anybody,
    	else you can only log out yourself.
    
    
  • DROP
    	Syntax: /msg ChanServ DROP channel
     
    	Syntax: DROP channel
    
    	Unregisters the named channel.  Can only be used by
    	channel founder, who must use the IDENTIFY command first.
    
    
  • SET
    	Syntax: /msg ChanServ SET channel option parameters
     
    	Syntax: SET channel option parameters
    
    	Allows the channel founder to set various channel options
    	and other information.
    
    	Available options:
    
    	    FOUNDER       Set the founder of a channel
    	    SUCCESSOR     Set the successor for a channel
    	    PASSWORD      Set the founder password
    	    DESC          Set the channel description
    	    URL           Associate a URL with the channel
    	    EMAIL         Associate an E-mail address with the channel
    	    ENTRYMSG      Set a message to be sent to users when they
    	                     enter the channel
    	    BANTYPE       Set how Services make bans on the channel
    	    MLOCK         Lock channel modes on or off
    	    KEEPTOPIC     Retain topic when channel is not in use
    	    OPNOTICE      Send a notice when OP/DEOP commands are used
    	    PEACE         Regulate the use of critical commands
    	    PRIVATE       Hide channel from LIST command
    	    RESTRICTED    Restrict access to the channel
    	    SECURE        Activate ChanServ security features
    	    SECUREOPS     Stricter control of chanop status
    	    SECUREFOUNDER Stricter control of channel founder status
    	    SIGNKICK      Sign kicks that are done with KICK command
    	    TOPICLOCK     Topic can only be changed with TOPIC
    	    XOP           Toggle the user privilege system
    
    	Type /msg ChanServ HELP SET option for more information on a
    	particular option.
    
    
  • SET FOUNDER
    	Syntax: /msg ChanServ SET channel FOUNDER nick
     
    	Syntax: SET channel FOUNDER nick
    
    	Changes the founder of a channel.  The new nickname must
    	be a registered one.
    
    
  • SET SUCCESSOR
    	Syntax: /msg ChanServ SET channel SUCCESSOR nick
     
    	Syntax: SET channel SUCCESSOR nick
    
    	Changes the successor of a channel.  If the founder's
    	nickname expires or is dropped while the channel is still
    	registered, the successor will become the new founder of the
    	channel.  However, if the successor already has too many
    	channels registered (%d), the channel will be dropped
    	instead, just as if no successor had been set.  The new
    	nickname must be a registered one.
    
    
  • SET PASSWORD
    	Syntax: /msg ChanServ SET channel PASSWORD password
     
    	Syntax: SET channel PASSWORD password
    
    	Sets the password used to identify as the founder of the
    	channel.
    
    
  • SET DESC
    	Syntax: /msg ChanServ SET channel DESC description
     
    	Syntax: SET channel DESC description
    
    	Sets the description for the channel, which shows up with
    	the LIST and INFO commands.
    
    
  • SET URL
    	Syntax: /msg ChanServ SET channel URL [url]
     
    	Syntax: SET channel URL [url]
    
    	Associates the given URL with the channel.  This URL will
    	be displayed whenever someone requests information on the
    	channel with the INFO command.  If no parameter is given,
    	deletes any current URL for the channel.
    
    
  • SET EMAIL
    	Syntax: /msg ChanServ SET channel EMAIL [address]
     
    	Syntax: SET channel EMAIL [address]
    
    	Associates the given E-mail address with the channel.
    	This address will be displayed whenever someone requests
    	information on the channel with the INFO command.  If no
    	parameter is given, deletes any current E-mail address for
    	the channel.
    
    
  • SET ENTRYMSG
    	Syntax: /msg ChanServ SET channel ENTRYMSG [message]
     
    	Syntax: SET channel ENTRYMSG [message]
    
    	Sets the message which will be sent via /notice to users
    	when they enter the channel.  If no parameter is given,
    	causes no message to be sent upon entering the channel.
    
    
  • SET BANTYPE
    	Syntax: /msg ChanServ SET channel BANTYPE bantype
     
    	Syntax: SET channel BANTYPE bantype
    
    	Sets the ban type that will be used by services whenever
    	they need to ban someone from your channel.
    
    	bantype is a number between 0 and 3 that means:
    
    	0: ban in the form *!user@host
    	1: ban in the form *!*user@host
    	2: ban in the form *!*@host
    	3: ban in the form *!*user@*.domain
    
    
  • SET KEEPTOPIC
    	Syntax: /msg ChanServ SET channel KEEPTOPIC {ON | OFF}
     
    	Syntax: SET channel KEEPTOPIC {ON | OFF}
    
    	Enables or disables the topic retention option for a
    	channel.  When topic retention is set, the topic for the
    	channel will be remembered by ChanServ even after the
    	last user leaves the channel, and will be restored the
    	next time the channel is created.
    
    
  • SET TOPICLOCK
    	Syntax: /msg ChanServ SET channel TOPICLOCK {ON | OFF}
     
    	Syntax: SET channel TOPICLOCK {ON | OFF}
    
    	Enables or disables the topic lock option for a channel.
    	When topic lock is set, ChanServ will not allow the
    	channel topic to be changed except via the TOPIC
    	command.
    
    
  • SET MLOCK
    	Syntax: /msg ChanServ SET channel MLOCK modes
     
    	Syntax: SET channel MLOCK modes
    
    	Sets the mode-lock parameter for the channel. ChanServ
    	allows you to define certain channel modes to be always
    	on, off or free to be either on or off.
    
    	The modes parameter is constructed exactly the same way
    	as a /MODE command; that is, modes followed by a + are
    	locked on, and modes followed by a - are locked off. Note,
    	however, that unlike the /MODE command, each use of
    	SET MLOCK will remove all modes previously locked before
    	setting the new!
    
    	Warning:  If you set a mode-locked key, as in the second
    	example below, you should also set the RESTRICTED option for
    	the channel (see HELP SET RESTRICTED), or anyone entering
    	the channel when it is empty will be able to see the key!
    
    	Examples:
    
    	    SET #channel MLOCK +nt-iklps
    	        Forces modes n and t on, and modes i, k, l, p, and
    	        s off.  Mode m is left free to be either on or off.
    
    	    SET #channel MLOCK +knst-ilmp my-key
    	        Forces modes k, n, s, and t on, and modes i, l, m,
    	        and p off.  Also forces the channel key to be
    	        "my-key".
    
    	    SET #channel MLOCK +
    	        Removes the mode lock; all channel modes are free
    	        to be either on or off.
    
    
  • SET PEACE
    	Syntax: /msg ChanServ SET channel PEACE {ON | OFF}
     
    	Syntax: SET channel PEACE {ON | OFF}
    
    	Enables or disables the peace option for a channel.
    	When peace is set, a user won't be able to kick,
    	ban or remove a channel status of a user that has
    	a level superior or equal to his via ChanServ commands.
    
    
  • SET PRIVATE
    	Syntax: /msg ChanServ SET channel PRIVATE {ON | OFF}
     
    	Syntax: SET channel PRIVATE {ON | OFF}
    
    	Enables or disables the private option for a channel.
    	When private is set, a /msg ChanServ LIST will not
    	include the channel in any lists.
    
    
  • SET RESTRICTED
    	Syntax: /msg ChanServ SET channel RESTRICTED {ON | OFF}
     
    	Syntax: SET channel RESTRICTED {ON | OFF}
    
    	Enables or disables the restricted access option for a
    	channel.  When restricted access is set, users not on
    	the access list will instead be kicked and banned from the channel.
    
    
  • SET SECURE
    	Syntax: /msg ChanServ SET channel SECURE {ON | OFF}
     
    	Syntax: SET channel SECURE {ON | OFF}
    
    	Enables or disables ChanServ's security features for a
    	channel.  When SECURE is set, only users who have
    	registered their nicknames with ChanServ and IDENTIFY'd
    	with their password will be given access to the channel
    	as controlled by the access list.
    
    
  • SET SECUREOPS
    	Syntax: /msg ChanServ SET channel SECUREOPS {ON | OFF}
     
    	Syntax: SET channel SECUREOPS {ON | OFF}
    
    	Enables or disables the secure ops option for a channel.
    	When secure ops is set, users who are not on the userlist
    	will not be allowed chanop status.
    
    
  • SET SECUREFOUNDER
    	Syntax: /msg ChanServ SET channel SECUREFOUNDER {ON | OFF}
     
    	Syntax: SET channel SECUREFOUNDER {ON | OFF}
    
    	Enables or disables the secure founder option for a channel.
    	When secure founder is set, only the real founder will be
    	able to drop the channel, change its password, its founder and its
    	successor, and not those who are IDENTIFY'd with ChanServ.
    
    
  • SET SIGNKICK
    	Syntax: /msg ChanServ SET channel SIGNKICK {ON | LEVEL | OFF}
     
    	Syntax: SET channel SIGNKICK {ON | LEVEL | OFF}
    
    	Enables or disables signed kicks for a
    	channel.  When SIGNKICK is set, kicks issued with
    	ChanServ KICK command will have the nick that used the
    	command in their reason.
    
    	If you use LEVEL, those who have a level that is superior
    	or equal to the SIGNKICK level on the channel won't have their
    	kicks signed. See /msg ChanServ HELP LEVELS for more information.
    
    
  • SET XOP
    	Syntax: /msg ChanServ SET channel XOP {ON | OFF}
     
    	Syntax: SET channel XOP {ON | OFF}
    
    	Enables or disables the xOP lists system for a channel.
    	When XOP is set, you have to use the AOP/SOP/VOP
    	commands in order to give channel privileges to
    	users, else you have to use the ACCESS command.
    
    	Technical Note: when you switch from access list to xOP
    	lists system, your level definitions and user levels will be
    	changed, so you won't find the same values if you
    	switch back to access system!
    
    	You should also check that your users are in the good xOP
    	list after the switch from access to xOP lists, because the
    	guess is not always perfect... in fact, it is not recommended
    	to use the xOP lists if you changed level definitions with
    	the LEVELS command.
    
    	Switching from xOP lists system to access list system
    	causes no problem though.
    
    
  • SET OPNOTICE
    	Syntax: /msg ChanServ SET channel OPNOTICE {ON | OFF}
     
    	Syntax: SET channel OPNOTICE {ON | OFF}
    
    	Enables or disables the op-notice option for a channel.
    	When op-notice is set, ChanServ will send a notice to the
    	channel whenever the OP or DEOP commands are used for a user
    	in the channel.
    
    
  • AOP
    	Syntax: /msg ChanServ AOP channel ADD nick
     
    	Syntax: AOP channel ADD nick
    	        AOP channel DEL {nick | entry-num | list}
    	        AOP channel LIST [mask | list]
    	        AOP channel CLEAR
    
    	Maintains the AOP (AutoOP) list for a channel. The AOP
    	list gives users the right to be auto-opped on your channel,
    	to unban or invite themselves if needed, to have their
    	greet message showed on join, and so on.
    
    	The AOP ADD command adds the given nickname to the
    	AOP list.
    
    	The AOP DEL command removes the given nick from the
    	AOP list.  If a list of entry numbers is given, those
    	entries are deleted.  (See the example for LIST below.)
    
    	The AOP LIST command displays the AOP list.  If
    	a wildcard mask is given, only those entries matching the
    	mask are displayed.  If a list of entry numbers is given,
    	only those entries are shown; for example:
    
    	   AOP #channel LIST 2-5,7-9
    	      Lists AOP entries numbered 2 through 5 and
    	      7 through 9.
    
    	The AOP CLEAR command clears all entries of the
    	AOP list.
    
    	The AOP ADD and AOP DEL commands are limited to
    	SOPs or above, while the AOP CLEAR command can only
    	be used by the channel founder. However, any user on the
    	AOP list may use the AOP LIST command.
    
    	This command may have been disabled for your channel, and
    	in that case you need to use the access list. See
    	/msg ChanServ HELP ACCESS for information about the access list,
    	and /msg ChanServ HELP SET XOP to know how to toggle between
    	the access list and xOP list systems.
    
    
  • HOP
    	Syntax: /msg ChanServ HOP channel ADD nick
     
    	Syntax: HOP channel ADD nick
    	        HOP channel DEL {nick | entry-num | list}
    	        HOP channel LIST [mask | list]
    	        HOP channel CLEAR
    
    	Maintains the HOP (HalfOP) list for a channel. The HOP
    	list gives users the right to be auto-halfopped on your
    	channel.
    
    	The HOP ADD command adds the given nickname to the
    	HOP list.
    
    	The HOP DEL command removes the given nick from the
    	HOP list.  If a list of entry numbers is given, those
    	entries are deleted.  (See the example for LIST below.)
    
    	The HOP LIST command displays the HOP list.  If
    	a wildcard mask is given, only those entries matching the
    	mask are displayed.  If a list of entry numbers is given,
    	only those entries are shown; for example:
    
    	   HOP #channel LIST 2-5,7-9
    	      Lists HOP entries numbered 2 through 5 and
    	      7 through 9.
    
    	The HOP CLEAR command clears all entries of the
    	HOP list.
    
    	The HOP ADD, HOP DEL and HOP LIST commands are
    	limited to AOPs or above, while the HOP CLEAR command
    	can only be used by the channel founder.
    
    	This command may have been disabled for your channel, and
    	in that case you need to use the access list. See
    	/msg ChanServ HELP ACCESS for information about the access list,
    	and /msg ChanServ HELP SET XOP to know how to toggle between
    	the access list and xOP list systems.
    
    
  • SOP
    	Syntax: /msg ChanServ SOP channel ADD nick
     
    	Syntax: SOP channel ADD nick
    	        SOP channel DEL {nick | entry-num | list}
    	        SOP channel LIST [mask | list]
    	        SOP channel CLEAR
    
    	Maintains the SOP (SuperOP) list for a channel. The SOP
    	list gives users all rights given by the AOP list, and adds
    	those needed to use the AutoKick and the BadWords lists,
    	to send and read channel memos, and so on.
    
    	The SOP ADD command adds the given nickname to the
    	SOP list.
    
    	The SOP DEL command removes the given nick from the
    	SOP list.  If a list of entry numbers is given, those
    	entries are deleted.  (See the example for LIST below.)
    
    	The SOP LIST command displays the SOP list.  If
    	a wildcard mask is given, only those entries matching the
    	mask are displayed.  If a list of entry numbers is given,
    	only those entries are shown; for example:
    
    	   SOP #channel LIST 2-5,7-9
    	      Lists AOP entries numbered 2 through 5 and
    	      7 through 9.
    
    	The SOP CLEAR command clears all entries of the
    	SOP list.
    
    	The SOP ADD, SOP DEL and SOP CLEAR commands are
    	limited to the channel founder. However, any user on the
    	AOP list may use the SOP LIST command.
    
    	This command may have been disabled for your channel, and
    	in that case you need to use the access list. See
    	/msg ChanServ HELP ACCESS for information about the access list,
    	and /msg ChanServ HELP SET XOP to know how to toggle between
    	the access list and xOP list systems.
    
    
  • VOP
    	Syntax: /msg ChanServ VOP channel ADD nick
     
    	Syntax: VOP channel ADD nick
    	        VOP channel DEL {nick | entry-num | list}
    	        VOP channel LIST [mask | list]
    	        VOP channel CLEAR
    
    	Maintains the VOP (VOicePeople) list for a channel.
    	The VOP list allows users to be auto-voiced and to voice
    	themselves if they aren't.
    
    	The VOP ADD command adds the given nickname to the
    	VOP list.
    
    	The VOP DEL command removes the given nick from the
    	VOP list.  If a list of entry numbers is given, those
    	entries are deleted.  (See the example for LIST below.)
    
    	The VOP LIST command displays the VOP list.  If
    	a wildcard mask is given, only those entries matching the
    	mask are displayed.  If a list of entry numbers is given,
    	only those entries are shown; for example:
    
    	   VOP #channel LIST 2-5,7-9
    	      Lists VOP entries numbered 2 through 5 and
    	      7 through 9.
    
    	The VOP CLEAR command clears all entries of the
    	VOP list.
    
    	The VOP ADD, VOP DEL and VOP LIST commands are
    	limited to AOPs or above, while the VOP CLEAR command
    	can only be used by the channel founder.
    
    	This command may have been disabled for your channel, and
    	in that case you need to use the access list. See
    	/msg ChanServ HELP ACCESS for information about the access list,
    	and /msg ChanServ HELP SET XOP to know how to toggle between
    	the access list and xOP list systems.
    
    
  • ACCESS
    	Syntax: /msg ChanServ ACCESS channel ADD nick level
     
    	Syntax: ACCESS channel ADD nick level
    	        ACCESS channel DEL {nick | entry-num | list}
    	        ACCESS channel LIST [mask | list]
    	        ACCESS channel CLEAR
    
    	Maintains the access list for a channel.  The access
    	list specifies which users are allowed chanop status or
    	access to ChanServ commands on the channel.  Different
    	user levels allow for access to different subsets of
    	privileges; /msg ChanServ HELP ACCESS LEVELS for more
    	specific information.  Any nick not on the access list has
    	a user level of 0.
    
    	The ACCESS ADD command adds the given nickname to the
    	access list with the given user level; if the nick is
    	already present on the list, its access level is changed to
    	the level specified in the command.  The level specified
    	must be less than that of the user giving the command, and
    	if the nick is already on the access list, the current
    	access level of that nick must be less than the access level
    	of the user giving the command.
    
    	The ACCESS DEL command removes the given nick from the
    	access list.  If a list of entry numbers is given, those
    	entries are deleted.  (See the example for LIST below.)
    
    	The ACCESS LIST command displays the access list.  If
    	a wildcard mask is given, only those entries matching the
    	mask are displayed.  If a list of entry numbers is given,
    	only those entries are shown; for example:
    
    	   ACCESS #channel LIST 2-5,7-9
    	      Lists access entries numbered 2 through 5 and
    	      7 through 9.
    
    	The ACCESS CLEAR command clears all entries of the
    	access list.
    
    
  • ACCESS LEVELS
    	User access levels
    
    	By default, the following access levels are defined:
    
    	   Founder   Full access to ChanServ functions; automatic
    	                     opping upon entering channel.  Note
    	                     that only one person may have founder
    	                     status (it cannot be given using the
    	                     ACCESS command).
    	        10   Access to AKICK command; automatic opping.
    	         5   Automatic opping.
    	         3   Automatic voicing.
    	         0   No special privileges; can be opped by other
    	                     ops (unless secure-ops is set).
    	        <0   May not be opped.
    
    	These levels may be changed, or new ones added, using the
    	LEVELS command; type /msg ChanServ HELP LEVELS for
    	information.
    
    
  • AKICK
    	Syntax: /msg ChanServ AKICK channel ADD {nick | mask} [reason]
     
    	Syntax: AKICK channel ADD {nick | mask} [reason]
    	        AKICK channel STICK mask
    	        AKICK channel UNSTICK mask
    	        AKICK channel DEL {nick | mask | entry-num | list}
    	        AKICK channel LIST [mask | entry-num | list]
    	        AKICK channel VIEW [mask | entry-num | list]
    	        AKICK channel ENFORCE
    	        AKICK channel CLEAR
    
    	Maintains the AutoKick list for a channel.  If a user
    	on the AutoKick list attempts to join the channel,
    	ChanServ will ban that user from the channel, then kick
    	the user.
    
    	The AKICK ADD command adds the given nick or usermask
    	to the AutoKick list.  If a reason is given with
    	the command, that reason will be used when the user is
    	kicked; if not, the default reason is "You have been
    	banned from the channel".
    	When akicking a registered nick the nickserv account
    	will be added to the akick list instead of the mask.
    	All users within that nickgroup will then be akicked.
    
    	The AKICK STICK command permanently bans the given mask
    	on the channel. If someone tries to remove the ban, ChanServ
    	will automatically set it again. You can't use it for
    	registered nicks.
    
    	The AKICK UNSTICK command cancels the effect of the
    	AKICK STICK command, so you'll be able to unset the
    	ban again on the channel.
    
    	The AKICK DEL command removes the given nick or mask
    	from the AutoKick list.  It does not, however, remove any
    	bans placed by an AutoKick; those must be removed
    	manually.
    
    	The AKICK LIST command displays the AutoKick list, or
    	optionally only those AutoKick entries which match the
    	given mask.
    
    	The AKICK VIEW command is a more verbose version of
    	AKICK LIST command.
    
    	The AKICK ENFORCE command causes ChanServ to enforce the
    	current AKICK list by removing those users who match an
    	AKICK mask.
    
    	The AKICK CLEAR command clears all entries of the
    	akick list.
    
    
  • LEVELS
    	Syntax: /msg ChanServ LEVELS channel SET type level
     
    	Syntax: LEVELS channel SET type level
    	        LEVELS channel {DIS | DISABLE} type
    	        LEVELS channel LIST
    	        LEVELS channel RESET
    
    	The LEVELS command allows fine control over the meaning of
    	the numeric access levels used for channels.  With this
    	command, you can define the access level required for most
    	of ChanServ's functions.  (The SET FOUNDER and SET PASSWORD
    	commands, as well as this command, are always restricted to
    	the channel founder.)
    
    	LEVELS SET allows the access level for a function or group of
    	functions to be changed.  LEVELS DISABLE (or DIS for short)
    	disables an automatic feature or disallows access to a
    	function by anyone other than the channel founder.
    	LEVELS LIST shows the current levels for each function or
    	group of functions.  LEVELS RESET resets the levels to the
    	default levels of a newly-created channel (see
    	HELP ACCESS LEVELS).
    
    	For a list of the features and functions whose levels can be
    	set, see HELP LEVELS DESC.
    
    
  • INFO
    	Syntax: /msg ChanServ INFO channel [ALL]
     
    	Syntax: INFO channel [ALL]
    
    	Lists information about the named registered channel,
    	including its founder, time of registration, last time
    	used, description, and mode lock, if any. If ALL is
    	specified, the entry message and successor will also
    	be displayed.
    
    	By default, the ALL option is limited to those with
    	founder access on the channel.
    
    
  • LIST
    	Syntax: /msg ChanServ LIST pattern
     
    	Syntax: LIST pattern
    
    	Lists all registered channels matching the given pattern.
    	(Channels with the PRIVATE option set are not listed.)
    	Note that a preceding '#' specifies a range, channel names
    	are to be written without '#'.
    
    
  • OP
    	Syntax: /msg ChanServ OP [#channel [nick]]
     
    	Syntax: OP [#channel [nick]]
    
    	Ops a selected nick on a channel. If nick is not given,
    	it will op you. If channel and nick are not given,
    	it will op you on all channels you're on, provided you
    	have the rights to.
    
    	By default, limited to AOPs or those with level 5 access
    	and above on the channel.
    
    
  • DEOP
    	Syntax: /msg ChanServ DEOP [#channel [nick]]
     
    	Syntax: DEOP [#channel [nick]]
    
    	Deops a selected nick on a channel. If nick is not given,
    	it will deop you. If channel and nick are not given,
    	it will deop you on all channels you're on, provided you
    	have the rights to.
    
    	By default, limited to AOPs or those with level 5 access
    	and above on the channel.
    
    
  • VOICE
    	Syntax: /msg ChanServ VOICE [#channel [nick]]
     
    	Syntax: VOICE [#channel [nick]]
    
    	Voices a selected nick on a channel. If nick is not given,
    	it will voice you. If channel and nick are not given,
    	it will voice you on all channels you're on, provided you
    	have the rights to.
    
    	By default, limited to AOPs or those with level 5 access
    	and above on the channel, or to VOPs or those with level 3
    	and above for self voicing.
    
    
  • DEVOICE
    	Syntax: /msg ChanServ DEVOICE [#channel [nick]]
     
    	Syntax: DEVOICE [#channel [nick]]
    
    	Devoices a selected nick on a channel. If nick is not given,
    	it will devoice you. If channel and nick are not given,
    	it will devoice you on all channels you're on, provided you
    	have the rights to.
    
    	By default, limited to AOPs or those with level 5 access
    	and above on the channel, or to VOPs or those with level 3
    	and above for self devoicing.
    
    
  • HALFOP
    	Syntax: /msg ChanServ HALFOP [#channel [nick]]
     
    	Syntax: HALFOP [#channel [nick]]
    
    	Halfops a selected nick on a channel. If nick is not given,
    	it will halfop you. If channel and nick are not given,
    	it will halfop you on all channels you're on, provided you
    	have the rights to.
    
    	By default, limited to AOPs and those with level 5 access
    	and above on the channel, or to HOPs or those with level 4
    	and above for self halfopping.
    
    
  • DEHALFOP
    	Syntax: /msg ChanServ DEHALFOP [#channel [nick]]
     
    	Syntax: DEHALFOP [#channel [nick]]
    
    	Dehalfops a selected nick on a channel. If nick is not given,
    	it will dehalfop you. If channel and nick are not given,
    	it will dehalfop you on all channels you're on, provided you
    	have the rights to.
    
    	By default, limited to AOPs and those with level 5 access
    	and above on the channel, or to HOPs or those with level 4
    	and above for self dehalfopping.
    
    
  • PROTECT
    	Syntax: /msg ChanServ PROTECT [#channel [nick]]
     
    	Syntax: PROTECT [#channel [nick]]
    
    	Protects a selected nick on a channel. If nick is not given,
    	it will protect you. If channel and nick are not given,
    	it will protect you on all channels you're on, provided you
    	have the rights to.
    
    	By default, limited to the founder, or to SOPs or those with
    	level 10 and above on the channel for self protecting.
    
    
  • DEPROTECT
    	Syntax: /msg ChanServ DEPROTECT [#channel [nick]]
     
    	Syntax: DEPROTECT [#channel [nick]]
    
    	Deprotects a selected nick on a channel. If nick is not given,
    	it will deprotect you. If channel and nick are not given,
    	it will deprotect you on all channels you're on, provided you
    	have the rights to.
    
    	By default, limited to the founder, or to SOPs or those with
    	level 10 and above on the channel for self deprotecting.
    
    
  • OWNER
    	Syntax: /msg ChanServ OWNER [#channel]
     
    	Syntax: OWNER [#channel]
    
    	Gives you owner status on channel. If channel is not
    	given, it will give you owner status on all channels you're
    	on, provided you have the rights to.
    
    	Limited to those with founder access on the channel.
    
    
  • DEOWNER
    	Syntax: /msg ChanServ DEOWNER [#channel]
     
    	Syntax: DEOWNER [#channel]
    
    	Removes your owner status on channel. If channel is
    	not given, it will remove your owner status on all channels
    	you're on, provided you have the rights to.
    
    	Limited to those with founder access on the channel.
    
    
  • INVITE
    	Syntax: /msg ChanServ INVITE channel
     
    	Syntax: INVITE channel
    
    	Tells ChanServ to invite you into the given channel.
    
    	By default, limited to AOPs or those with level 5 and above
    	on the channel.
    
    
  • UNBAN
    	Syntax: /msg ChanServ UNBAN channel
     
    	Syntax: UNBAN channel
    
    	Tells ChanServ to remove all bans preventing you from
    	entering the given channel.
    
    	By default, limited to AOPs or those with level 5 and above
    	on the channel.
    
    
  • KICK
    	Syntax: /msg ChanServ KICK [#channel [nick [reason]]]
     
    	Syntax: KICK [#channel [nick [reason]]]
    
    	Kicks a selected nick on a channel. If nick is not given,
    	it will kick you. If channel and nick are not given,
    	it will kick you on all channels you're on, provided you
    	have the rights to.
    
    	By default, limited to AOPs or those with level 5 access
    	and above on the channel.
    
    
  • BAN
    	Syntax: /msg ChanServ BAN [#channel [nick [reason]]]
     
    	Syntax: BAN [#channel [nick [reason]]]
    
    	Bans a selected nick on a channel. If nick is not given,
    	it will ban you. If channel and nick are not given,
    	it will ban you on all channels you're on, provided you
    	have the rights to.
    
    	By default, limited to AOPs or those with level 5 access
    	and above on the channel.
    
    
  • TOPIC
    	Syntax: /msg ChanServ TOPIC channel [topic]
     
    	Syntax: TOPIC channel [topic]
    
    	Causes ChanServ to set the channel topic to the one
    	specified. If topic is not given, then an empty topic
    	is set. This command is most useful in conjunction
    	with SET TOPICLOCK. See /msg ChanServ HELP SET TOPICLOCK
    	for more information.
    
    	By default, limited to those with founder access on the
    	channel.
    
    
  • CLEAR
    	Syntax: /msg ChanServ CLEAR channel what
     
    	Syntax: CLEAR channel what
    
    	Tells ChanServ to clear certain settings on a channel.  what
    	can be any of the following:
    
    	     MODES    Resets all modes on the channel (i.e. clears
    	                  modes i,k,l,m,n,p,s,t).
    	     BANS     Clears all bans on the channel.
    	     EXCEPTS  Clears all excepts on the channel.
    	     INVITES  Clears all invites on the channel.
    	     OPS      Removes channel-operator status (mode +o) from
    	                  all channel operators.
    	     HOPS     Removes channel-halfoperator status (mode +h) from
    	                  all channel halfoperators, if supported.
    	     VOICES   Removes "voice" status (mode +v) from anyone
    	                  with that mode set.
    	     USERS    Removes (kicks) all users from the channel.
    
    	By default, limited to those with founder access on the
    	channel.
    
    
  • GETKEY
    	Syntax: /msg ChanServ GETKEY channel
     
    	Syntax: GETKEY channel
    
    	Returns the key of the given channel. This is a command
    	mainly intended to be used by bots and/or scripts, so
    	the output is in the following way:
    
    	KEY  
    
    	key is "NO KEY" if no key is set.
    
    
  • SENDPASS
    	Syntax: /msg ChanServ SENDPASS channel
     
    	Syntax: SENDPASS channel
    
    	Send the password of the given channel to the e-mail address
    	set in the founder's nickname record. This command is really
    	useful to deal with lost passwords.
    
    	May be limited to IRC operators on certain networks.
    
    	This command is unavailable when encryption is enabled.
    
    
  • SERVADMIN HELP
    
    	Services admins can also drop any channel without needing
    	to identify via password, and may view the access, AKICK,
    	and level setting lists for any channel.
    
    
  • SERVADMIN LOGOUT
    	Syntax: /msg ChanServ LOGOUT channel [nickname]
     
    	Syntax: LOGOUT channel [nickname]
    
    	This command will log the selected nickname out meaning they
    	would have to reidentify themselves to regain their access.
    
    	If you are the founder of the channel, you can log out anybody,
    	else you can only log out yourself.
    
    	If you are a Services admin, you can log out
    	anybody of any channel without having to be the founder
    	of the channel. Also, you can omit the nickname parameter;
    	this will log out all identified users from the channel.
    
    
  • SERVADMIN DROP
    	Syntax: /msg ChanServ DROP channel
     
    	Syntax: DROP channel
    
    	Unregisters the named channel.  Only Services admins
    	can drop a channel for which they have not identified.
    
    
  • SERVADMIN SET
    
    	Services admins can also set the option NOEXPIRE, with
    	which channels can be prevented from expiring.
    	Additionally, Services admins can set options for any
    	channel without identifying by password for the channel.
    
    
  • SERVADMIN SET NOEXPIRE
    	Syntax: /msg ChanServ SET channel NOEXPIRE {ON | OFF}
     
    	Syntax: SET channel NOEXPIRE {ON | OFF}
    
    	Sets whether the given channel will expire.  Setting this
    	to ON prevents the channel from expiring.
    
    
  • SERVADMIN INFO
    
    	Services admins can use the ALL parameter with any channel.
    
    
  • SERVADMIN LIST
    	Syntax: /msg ChanServ LIST pattern [FORBIDDEN] [SUSPENDED] [NOEXPIRE]
     
    	Syntax: LIST pattern [FORBIDDEN] [SUSPENDED] [NOEXPIRE]
    
    	Lists all registered channels matching the given pattern.
    	Channels with the PRIVATE option set will only be displayed
    	to Services admins. Channels with the NOEXPIRE option set
    	will have a ! appended to the channel name for Services admins.
    
    	If the FORBIDDEN, SUSPENDED or NOEXPIRE options are given, only
    	channels which, respectively, are FORBIDden, SUSPENDed or have
    	the NOEXPIRE flag set will be displayed.  If multiple options are
    	given, more types of channels will be displayed. These options are
    	limited to Services admins.
    
    
  • SERVADMIN GETPASS
    	Syntax: /msg ChanServ GETPASS channel
     
    	Syntax: GETPASS channel
    
    	Returns the password for the given channel.  Note that
    	whenever this command is used, a message including the
    	person who issued the command and the channel it was used
    	on will be logged and sent out as a WALLOPS/GLOBOPS.
    
    
  • SERVADMIN FORBID
    	Syntax: /msg ChanServ FORBID channel [reason]
     
    	Syntax: FORBID channel [reason]
    
    	Disallows anyone from registering or using the given
    	channel.  May be cancelled by dropping the channel.
    
    	Reason may be required on certain networks.
    
    
  • SERVADMIN SUSPEND
    	Syntax: /msg ChanServ SUSPEND channel [reason]
     
    	Syntax: SUSPEND channel [reason]
    
    	Disallows anyone from registering or using the given
    	channel.  May be cancelled by using the UNSUSPEND
    	command to preserve all previous channel data/settings.
    
    	Reason may be required on certain networks.
    
    
  • SERVADMIN UNSUSPEND
    	Syntax: /msg ChanServ UNSUSPEND channel
     
    	Syntax: UNSUSPEND channel
    
    	Releases a suspended channel. All data and settings
    	are preserved from before the suspension.
    
    
  • SERVADMIN STATUS
    	Syntax: /msg ChanServ STATUS channel nickname
     
    	Syntax: STATUS channel nickname
    
    	Returns the current access level of the given nick on the
    	given channel.  The reply is of the form:
    
    	    STATUS channel nickname access-level
    
    	If an error occurs, the reply will be in the form:
    
    	    STATUS ERROR error-message